Phillips 66

Phillips 66 X/C Aviation Oil 25W-60

$8.90 USD
$8.90 USD

1045500

All products shipped with manufacturer certificates!
VOLUME DISCOUNTS AVAILABLE PLEASE CONTACT: sales@145.aero
Quantity:
📦Usually ships in 1 Day

Phillips 66 X/C Aviation Oil 25W-60 - SAE Standard J1899

Phillips 66 X/C Aviation Oil is an ashless dispersant, multi-grade engine oil specially formulated for year-round use in aircraft piston engines. It provides distinct performance benefits compared with single-grade engine oils, including easier starting and faster oil circulation at low temperatures, reduced warm-up time, and reduced oil consumption in most engines. It maintains its film strength under high loads and at high temperatures to protect against wear and piston scuffing. The ashless dispersant formulation helps minimize the formation of engine sludge, varnish, piston deposits and combustion chamber deposits, resulting in a much cleaner engine compared with the use of straight (non-dispersant) mineral oils.

Features/Benefits

    • Ashless dispersant helps minimize engine sludge and varnish deposits for a cleaner engine
    • Easier starting and faster oil circulation at low temperatures compared with single-grade oils
    • Reduced warm-up time and cooler operating temperatures compared with single-grade oils
    • High film strength for protection against wear and piston scuffing, even under high-load conditions, such as takeoff, and at elevated operating temperatures
    • Provides cleaner and quicker break-in than traditional all-mineral, non-additized, single-grade oils
    • Protects against rust and corrosion
    • Reduces oil consumption in most engines
    • Suitable for year-round use

    Properties

    • SAE Grade 25W-60
    • Gravity, °API 28.8
    • Specific Gravity @ 60°F    0.883
    • Density, lbs/gal @ 60°F    7.35
    • Color, ASTM D1500    4
    • Flash Point (COC), °C (°F)    253 (487)
    • Pour Point, °C (°F)    -27 (-17)
    • Viscosity, Kinematic    
    • cSt @ 40°C    245
    • cSt @ 100°C    24.8
    • Viscosity Index    128
    • Cold Cranking Viscosity, cP    8200
    • °C    (-10)
    • Acid Number, ASTM D664, mg KOH/g    0.15
    • Ash Content, SAE J1787, wt %    Nil
    • Copper Corrosion, ASTM D130    Pass
    • Foam Test, ASTM D892    Pass

    Specifications

    • Avco Lycoming Material Specification No. 301G, 
    • Pratt & Whitney Service Bulletin No. 1183 Rev. U, 
    • SAE Standard J1899,
    • Teledyne Continental Material Specification MHS-24B,
    • U.S. Military Specification MIL-L-22851D (obsolete) for additive treatment.

    QPL Approval Numbers: D07L1-20W-50 (X/C 20W-50), D07L1-25W-60 (X/C 25W-60) X/C® Aviation Oil

    Download Technical Data Sheet

    Download Safety Data Sheet

    You May Also Like