Fiber Resin EY-4014 A/B Epoxy Adhesive | HB Fuller | Pint Kit

EY 4014 A/B EPOXY ADHESIVE

MANUFACTURER
H.B. Fuller

HB Fuller EY-4014 Yellow is a two component, thermosetting epoxy adhesive created for adhering a wide variety of fabricating materials, Delrin® included.

EY-4014 shows excellent chemical resistance. It produces high shear strengths by catalytic curing, cures with or without heat at contact pressure, and has high shear strength at moderate heat. Typical temperature use range is -40ºF to 200ºF, but can withstand short term exposure to lower and higher temperatures when minimal forces are exerted on the adhesive.


Properties

Typical Use:Used as an epoxy resin for adhering fabricating materials.

Color:Light Yellow

Components:2 part

Cure System:Room Temperature/Heat

Cure Time:7d @ 25 °C; 2h @ 48.9 °C; 30m @ 82.2 °C

Hardness:Mixed: 74 to 76 D

Mix Ratio:100:8.5 by volume; 100:7 by weight

Service Temperature:-40 °C to 93.3 °C

Tensile Strength:3,000 to 4,000 psi

Viscosity:Part A: 40,000; Mixed: 30,000


Specifications
Martin Marietta

STM GM535B

DPM 1132

DPS 1.07-39 REV.

AB

STM G-M535C

CLASS A