EY4014 | Quart Kit
EY 4014 A/B EPOXY ADHESIVE
MANUFACTURER
H.B. Fuller
HB Fuller EY-4014 Yellow is a two component, thermosetting epoxy adhesive created for adhering a wide variety of fabricating materials, Delrin® included.
EY-4014 shows excellent chemical resistance. It produces high shear strengths by catalytic curing, cures with or without heat at contact pressure, and has high shear strength at moderate heat. Typical temperature use range is -40ºF to 200ºF, but can withstand short term exposure to lower and higher temperatures when minimal forces are exerted on the adhesive.
Properties
Typical Use:Used as an epoxy resin for adhering fabricating materials.
Color:Light Yellow
Components:2 part
Cure System:Room Temperature/Heat
Cure Time:7d @ 25 °C; 2h @ 48.9 °C; 30m @ 82.2 °C
Hardness:Mixed: 74 to 76 D
Mix Ratio:100:8.5 by volume; 100:7 by weight
Service Temperature:-40 °C to 93.3 °C
Tensile Strength:3,000 to 4,000 psi
Viscosity:Part A: 40,000; Mixed: 30,000
Specifications
Martin Marietta
STM GM535B
DPM 1132
DPS 1.07-39 REV.
AB
STM G-M535C
CLASS A
