Miracle Power DGF-123 Dry Graphite Film Lubricant (MIL-G-26548) - 9 oz
FUNCTIONS OR PURPOSE dgf-123 is made for direct application to individual parts or bearing surfaces prior to assembly. It provides an efficient film of dry lubrication which ASSURES POSITIVE INITIAL LUBRICATION. dgf-123 dry film, with or without fluid lubrication, provides positive lubrication at the moment of initial movement between bearing surfaces. This protection against harmful metal-to-metal contact is present until normal lubricating oil films are established. It continues in effect and, in conjunction with lubricating oil, furnishes additional surface protection during the critical running-in period. dgf-123 dry film provides protection against fretting or seizure between tightly fitted parts whose movement is limited or mechanically confined. In this instance, the dgf-123 film functions as a parting or anti-seize medium. MAINTAINS THICKER OIL FILMS ON BEARING SURFACES dgf-123 film lowers interfacial tensions with oil and allows frictional surfaces to retain thicker oil films. This reduced surface tension further speeds the flow of oil to all points of the treated surface. The dgf-123 film actually performs the function of a wetting agent to distribute and hold oil on a treated surface. In addition, dgf-123 provides dependable lubrication even if the oil film is temporarily ruptured. Thicker oil films are especially beneficial tobearing surfaces during the initial run-in of a new or rebuilt engine. PRODUCES SMOOTHER MATED SURFACES The proper use of dgf-123 will produce smoother, more efficient bearing surfaces by protecting these surfaces during the initial mating or run-in period. Moments of extreme pressure or heat, where oil is unable to retain a constant protective film, will not cause harmful surface damage because the dgf-123 film provides stand-by lubrication until the oil film is re-established. REDUCES FRICTION AND HEAT BETWEEN BEARING SURFACES dgf-123 film reduces the coefficient of friction between bearing surfaces, particularly under high loadings or close initial tolerances. This reduction in friction results in measurable lower running temperatures. Surfaces treated with dgf-123 in conjunction with lubricating oil will withstand much higher operating temperatures without seizure than will surfaces lubricated with oil alone. dgf-123 withstands heat up to 3000F.
