Application
PolyGone 310-AG Gel is intended for use at room temperature (68°F-80°F). Heat (120ºF/49ºC) and/or gentle agitation, including ultrasonic, is not necessary but significantly enhances performance. The agitation removes the digested sealant and exposes underlying layers to fresh PolyGone 310-AG Gel. PolyGone 310-AG Gel must be used at full strength. Dilution and/or excessive heat, above 120ºF will deteriorate the emulsifier. RPM Technology recommends using PolyGone 310-AG Gel in a well-ventilated area and in a covered cleaning apparatus to prevent product evaporation.
Rinse
PolyGone 310-AG Gel is water-soluble. Although water may be used to rinse the product, rinsing with a mild cleaner such as eOx®, also available from RPM Technology, followed by pure water will improve removal of all residues. An emulsifier will improve rinsing via a “sheeting” effect, reduce sealant re-deposition, and reduce water usage. In cases where water is not preferred, a compatible solvent such as IPA or acetone may be used.
Compatibility
PolyGone 310-AG Gel is metal-friendly. The formulation is non-ionic and non-reactive. Metals such as Cu, Fe, Al, Zn, and Ti have been tested with PolyGone 310-AG Gel with no detected metal loss. However, PolyGone 310-AG Gel attacks many types of polymers and plastics. Polyvinyl chloride (PVC), polyvinyl alcohol, and similar plastics should not be treated with PolyGone 310-AG Gel. Many elastomers are also not recommended. RPM Technology recommends the following plastics for application and storage, Polypropylene, Poly Olefin, Polyethylene (low and high density), Teflon, and Butyl Rubber. Testing is necessary to demonstrate full compatibility.
PPE
Recommend personal protective equipment (PPE) includes safety glasses/goggles and nitrile or butyl rubber gloves. Aprons may be used to protect clothing. Do not use gloves made from latex or vinyl.
Toxicity
PolyGone 310-AG Gel contains a blend of polar organics. PolyGone 310-AG Gel has a low inherent toxicity and at diluted levels, is essentially non-toxic to aquatic life. The material is readily biodegradable and does not bio-accumulate.
Storage
PolyGone 310-AG Gel must be stored in a cool and dry environment away from light and incompatible materials. The recommended storage temperature is between 50ºF-80ºF (10ºC-27ºC). Under these conditions, unopened containers of PolyGone 310-AG Gel have a 1-year shelf life.
DisposalPolyGone contains no halogenated, reactive, or other EPA regulated components. Conformance with Federal, State, and Local disposal regulations is required. Diluted PolyGone can be disposed of by discharge to a sewage treatment plant with prior approval. Used PolyGone may need to be disposed of as organic solvent waste depending on the sealants and contaminates removed. PolyGone has a high BTU value and waste can be managed through a fuels-blending program.
PolyGone Approvals *
Airframes using PolyGone
- B-727
- B-737
- B-757
- DC-10
- MD-11
- A-340
- C-5 Galaxy
- Embraer
- Fairchild Metro
- ATR-42
- CRJ 100/200/700/900
- Challenger
- Hawker
- Beech
- Twin Commander
- Falcon
- Grumman
- King Air
- Mooney
- Cessna
- Lear
- Dornier
Airlines
- American Airlines
- Big Sky Airlines
- Comair
- FedEx
- Piedmont
- Southwest Airlines
- Agusta Aerospace Services S.A.
- Rega Swiss Air Ambulance
- Air Italy
- Miniliner
- Italian Air Force
- Sky Europe Airlines A.S.
- NAVAIR
- AFRL
Manufacturers
- Bell Helicopter
- Bombardier
- Cessna
- Mooney
- Sikorsky
- Twin Commander
* These lists do not include the 100’s of global FBO, MRO companies and individuals that use PolyGone on a regular basis to remove sealant.
