Smooth-On Metalset® Epoxy Adhesive A4-6
Smooth-On Metalset® two-part epoxy adhesive has excellent adhesion properties, which makes it ideal for industrial bonding applications to apply on both porous and non-porous surfaces. It can be easily applied even on vertical surfaces without sagging or losing adhesion. This adhesive comes in two parts A and B. The mild odored part-A has a flash point greater than 300 degrees F, viscosity of 1000 to 2000 cP and a specific gravity of 1.07. The mild ammonia odored part-B has a flash point greater than 485 degrees F, viscosity of 320,000 cP and a specific gravity of 1.4. This adhesive is supplied in a 6-ounce tube and can be mixed in a 1:1 ratio by volume or weight to form a metallic color mixture.
Features
Adhesive with good machining qualities, offers excellent resistance to alkalis, dilute acids and solvents
Contains aerodynamic smoothing compound
Specific volume of 19.5 cubic inches per pound
Tensile strength of 3600 psi and compressive strength of 7500 psi
Tensile modulus of 165000 psi and compressive modulus of 160000 psi
1.2% elongation at break
Sag resistance of 1/4 inch
Benefits
Ideal for stopping leaks in pipes/valves/tanks, bonding like/unlike surfaces, filling metal joints/dents and anchoring bolts in wood, concrete, or repairing metal surfaces
Great for setting abrasion-resistant tile in conveyors and pulverizing equipment
Serves as shim material between uneven surfaces
Suitable for use as auto or truck body solder
Use for making jigs and fixtures
Applications
- Stopping leaks in pipes, valves and tanks (car gas tanks)
- Bonding like and unlike surfaces
- Filling metal joints
- Dents
- Anchoring bolts in wood
- Concrete and repairing metal surfaces
Specifications
- Bell Spec 299-947-099 Rev. D Certified
- OSHA Hazard Certified
