IPG 515 Utility Paper Masking Tape - ASTM D6123 / 6123M, Type I  and C.I.D. A-A-883B, Type I

Interchangeable with 3M General Use Masking Tape 201+

515 Utility Paper Masking Tape is a general-purpose, beige, semi-bleached crepe paper masking tape coated with a pressure-sensitive natural/synthetic rubber adhesive. Designed for conformability and flexibility, it is a versatile and economical solution for a wide range of tasks where a reliable, temporary bond is needed. While not a high-performance, high-temperature aerospace tape, its utility-grade formulation provides sufficient adhesion for general masking, bundling, and protection, with the ability to remove cleanly from most surfaces without leaving residue, especially at room or moderate temperatures. Its design balances quick stick, panel adhesion, and holding properties, making it a staple for various industrial and maintenance applications.

Key Characteristics:

• Crepe Paper Backing: Semi-bleached crepe paper provides good conformability to irregular surfaces and curves.
  
• Natural/Synthetic Rubber Adhesive: Offers a good balance of quick stick, secure adhesion, and clean removal properties.
  
• Utility Grade: Designed for general-purpose use, balancing performance and cost-effectiveness.
  
• Flexible and Conformable: Adapts well to different shapes and surfaces.
  
• Clean Removal: Removes cleanly from most surfaces without leaving adhesive residue or damaging the substrate, especially within its recommended temperature and dwell time.
  
• Good Adhesion: Provides reliable adhesion to various materials, including painted and bare metals, plastics, and wood.
  
• Hand-Tearable: Easy to tear by hand, facilitating quick application.
  
• Color: Typically beige or natural, blending into various environments.
  
• Temperature Range: Generally suitable for operating temperatures from around 50°F to 180°F (10°C to 82°C), but performance at higher temperatures or extended dwell times can vary.

Application in Aviation:

• General Masking (Non-Critical): Used for light-duty masking during non-aerodynamic paint touch-ups, stenciling, or temporary protection in areas not subject to high temperatures or aggressive chemicals.
  
• Bundling and Holding: For bundling wires, cables, tools, or small components during storage, transport, or assembly.
  
• Temporary Securing: To temporarily hold protective covers, plastic sheeting, or rags in place during cleaning, repair, or inspection processes.
  
• Labeling and Marking: For temporary labeling of parts, tools, or bins in hangars, workshops, and storage areas.
  
• Surface Protection: To protect non-critical surfaces from minor scratches, dust, or overspray in non-painting contexts.
  
• Workstation Organization: Used in MRO facilities and manufacturing plants for organizing tools, marking areas, or temporary fixturing.
  
• Packaging and Tabbing: For light-duty packaging, sealing boxes, or tabbing materials in logistics and supply chain operations.

• All in-stock orders are processed within 1–2 business days (excluding weekends and holidays) after receiving your order confirmation email.
• Orders with a lead time will ship according to the estimated shipping time shown on the product page.
• If we experience a high volume of orders or if an item is backordered, processing times may be slightly delayed. We will notify you promptly via email.

• Returns and damage claims must be made within a maximum of 3 business days after receiving the product, with prior authorization from Aircraft Shop Supply (Return Material Authorization - RMA). Returns without prior notice or written authorization will not be accepted. We strongly recommend inspecting the product upon delivery; many products require special storage conditions for which we are not responsible once they arrive to the client's facility. Please review the product's SDS for proper storage and handling.
• For products with 3 to 6 months of remaining shelf life, claims must be made within the next 2 business days after receipt.
• Returns are not accepted for products with less than 3 months of remaining shelf life.
• Returns are not accepted for products purchased during a low Shelf Life promotion, items sold with discounts, or special orders that must be placed directly with the factory.
• The customer is responsible for the return shipping cost, except in cases where the return is due to an error on the part of Aircraft Shop Supply.
• Refunds will only be issued after the product has been inspected and no damage is found.
• A 25% Restocking Fee will be charged for returns of products in good condition that are either no longer needed or were ordered incorrectly.
• A 35% Restocking Fee will be charged for returns of products with one year or less of remaining shelf life.
• No Restocking Fee will be charged if Aircraft Shop Supply is responsible for incorrectly shipping a product, or if the order is damaged upon leaving the warehouse.
• Hazardous Materials & Dangerous Goods: These items are sold as final and are not eligible for return approval.

At Aircraft Shop Supply, we are committed to shipping the highest quality and freshest product possible. To ensure efficient stock rotation and meet aviation industry standards, our inventory management is governed by the following policy:

1. Scope of Application
All Sales Channels: This policy applies to all orders processed by Aircraft Shop Supply, including but not limited to: website purchases, direct email orders, formal Purchase Orders (POs), phone orders, and contract agreements.

2. Inventory Management (FIFO)
All products with an expiration date are managed and shipped on a strict "First In – First Out" (FIFO) basis.

3. Minimum Shipping Margin
Standard Guarantee: We will not ship any products with fewer than 30 days of use remaining (days before expiration), unless previously coordinated and agreed upon with the customer.

No Automatic Guarantees: Outside of this 30-day minimum margin, Aircraft Shop Supply does not make any automatic guarantee as to the specific length of time remaining on any shelf-life item for standard orders.

4. Special Customer Requirements
We understand that certain projects, maintenance schedules, or regulatory standards require strict specifications. If your order has specific shelf-life requirements, please proceed as follows:

How to Request: If you require a specific Date of Manufacture (DOM), Date of Expiration (DOE), or a specific minimum shelf-life percentage (%), you must clearly state this requirement:

In the Comments/Notes section when placing an online order.

Explicitly written on your Purchase Order (PO) or quote request email for offline orders.

Validation Process: Once your requirement is received:

We will ship your order if the available stock matches your specifications.

If we do not have the exact batch, we will contact you prior to shipping with the shelf-life percentage (%) or dates we have available for your acceptance.

5. Limitation of Liability and Validity of Information
To ensure transparency and manage expectations, the following terms and conditions apply:

Time-Limited Validity: Any information provided by our team regarding the remaining shelf-life percentage (%) is valid only at the exact time the inquiry is made. Due to high inventory turnover, availability is subject to change without prior notice.

Informational Purposes Only: Shelf-life data provided by Aircraft Shop Supply is strictly for informational purposes and reflects the availability at the moment of inquiry. It does not constitute a batch reservation or a product warranty.

Supply Chain Liability Exclusion: Aircraft Shop Supply is not responsible for the time elapsed or any product expiration that occurs after the order has been prepared and packed. This includes, but is not limited to: the time between order placement, carrier transit times, intermediary storage, customs delays, and final delivery to the end user. It is the customer's responsibility to account for these logistical lead times within their planning.