Aeroshell 58 Grease - SAE AMS3058 / AIMS 09-06-003 

MFG #: 550063164 (14 oz. Tube)

AeroShellGrease 58 (ASG58) is an advanced wheel-bearing grease composed of a synthetic base fluid and a lithium complex soap thickener. AeroShell Grease 58 possesses an outstanding combination of high-performance characteristics including high load carrying, corrosion protection, mechanical stability, oxidation resistance and wear resistance.

The useful operating temperature range is -54°C to +175°C

Aeroshelll Grease 58 has been developed to exceed the requirements of the SAE AMS 3058 Wide Temperature Range Lithium complex Aircraft WheelBearing Grease specification. It is recommended for use wherever severe operating conditions are encountered as in high bearing loads, high speeds, wide operating temperature range, and particularly where long grease retention and high resistance to water washout and corrosive fluids are required.AeroShell Grease 58 is the latest member of the AeroShell Lithium ComplexGrease portfolio which includes AeroShell Greases 33 and 64.

The wide range of applications includes aircraft heel bearings, engine accessories, control systems, actuators, screw-jacks, servo mechanisms and electronic motors, helicopter rotor earings, instruments, airframe lubrication, hinge pins, static joints, and landing gears.

Benefits at a glance

• Longer component life through better wear and corrosion protection*
• Reduced costs through prolonged bearing life*
• Longer grease life through superior dry and wet mechanical stability*
• Easiermaintenance with the same grease technology available across the aircraft*

*Compared with MIL-PRF-81322 specification greases

Specifications, Approvals & Recommendations

• SAE AMS3058
• Airbus AIMS09-06-003

AeroShell grease 58 exceeds the latest SAE AMS 3058 specification for wheel bearing that requires the use of lithium-complex technology. But beware, not all commercially available lithium-complex thickened wheel-bearing greases meet these minimum requirements.

Is Aeroshell Grease 58 approved for my aircraft?

AeroShell Grease 58 meets theSAE AMS3058 specification and has the following manufacturer approvals:

• Airbus (all carriage systems for civil A320, A330, S340, S350 and A380 family aircraft, and all wheels onA318, A319 and A320, including neo,and A350-900 and -1000 models)
• Boeing (Collins wheels on most aircraft with the remaining approvals in 2022);
• ATR 42 (Collins wheels)
• all Parker Hannifinnon-amphibious wheel applications and
• Pilatus first fill.

• All in-stock orders are processed within 1–2 business days (excluding weekends and holidays) after receiving your order confirmation email.
• Orders with a lead time will ship according to the estimated shipping time shown on the product page.
• If we experience a high volume of orders or if an item is backordered, processing times may be slightly delayed. We will notify you promptly via email.

• Returns must be made within a maximum of 3 business days after receiving the product, with prior authorization from Aircraft Shop Supply (Return Material Authorization). Returns without prior notice or written authorization will not be accepted.
• For products with 3 to 6 months of remaining shelf life, claims must be made within the next 2 business days after receipt.
• Returns are not accepted for products with less than 3 months of remaining shelf life.
• Returns are not accepted for products purchased during a low Shelf Life promotion, items sold with discounts, or special orders that must be placed directly with the factory.
• The customer is responsible for the return shipping cost, except in cases where the return is due to an error on the part of Aircraft Shop Supply.
• Refunds will only be issued after the product has been inspected and no damage is found.
• A 25% Restocking Fee will be charged for returns of products in good condition that are either no longer needed or were ordered incorrectly.
• A 35% Restocking Fee will be charged for returns of products with one year or less of remaining shelf life.
• No Restocking Fee will be charged if Aircraft Shop Supply is responsible for incorrectly shipping a product, or if the order is damaged upon leaving the warehouse.
• Hazardous Materials & Dangerous Goods: These items are sold as final and are not eligible for return approval.