RD-S Rhino Dirt Reseable Bags - 0.5 cu. ft each

• Soft Abrasive: Made from natural, softer materials (e.g., walnut shells, corn cob grit) that are less aggressive than mineral or metallic abrasives.
• Non-Damaging: Cleans surfaces effectively without causing etching, pitting, or deformation of the underlying material, making it ideal for delicate substrates.
• Biodegradable and Eco-Friendly: Composed of natural, renewable resources, making it an environmentally responsible choice for blasting and cleaning.
• Low Dust Generation: Produces significantly less airborne dust compared to conventional abrasive blasting media, improving worker visibility and air quality.
• Non-Silica: Does not contain free silica, eliminating the health risks associated with silicosis.
• Absorbent Properties: Can absorb oils, greases, and other liquids, contributing to a cleaner surface.
• Controlled Cleaning: Provides a gentle yet effective cleaning action, allowing for precise removal of coatings or contaminants.
• Reusable (Limited): Depending on the application and contamination levels, it can sometimes be collected and reused, contributing to cost efficiency.

Application in Aviation:

• Engine Component Cleaning: Used for cleaning carbon deposits, grease, and other residues from precision engine parts, turbine blades, cylinder heads, pistons, and manifolds during overhaul. This is crucial as aggressive cleaning could alter tolerances or damage critical surfaces.
  
• Aircraft Wheel Cleaning: Effective for cleaning and degreasing aircraft wheels, removing brake dust, dirt, and other contaminants without harming the wheel's finish or structural integrity.
  
• Paint and Coating Removal: Used for stripping old paint, primers, or light coatings from aircraft skins, composite parts, or delicate components where chemical strippers are undesirable or traditional sandblasting is too aggressive.
  
• Corrosion Removal (Light): For removing light corrosion or oxidation from aluminum, magnesium, and other sensitive alloys without pitting the surface.
  
• Cleaning of Composite Structures: Can be used to clean certain composite parts without damaging the resin or fiber matrix.
  
• Restoration of Sensitive Equipment: Ideal for cleaning delicate equipment, electronics, or instruments where precise cleaning without abrasion is necessary. This method is commonly referred to as "soft media blasting" or "dry abrasive blasting with organic media" and is a critical part of numerous aircraft maintenance procedures to preserve component life and airworthiness.

Download Safety Data Sheet

Download List of hydrocarbons & chemicals absorbed by Rhino Dirt

• All in-stock orders are processed within 1–2 business days (excluding weekends and holidays) after receiving your order confirmation email.
• Orders with a lead time will ship according to the estimated shipping time shown on the product page.
• If we experience a high volume of orders or if an item is backordered, processing times may be slightly delayed. We will notify you promptly via email.

• Returns and damage claims must be made within a maximum of 3 business days after receiving the product, with prior authorization from Aircraft Shop Supply (Return Material Authorization - RMA). Returns without prior notice or written authorization will not be accepted. We strongly recommend inspecting the product upon delivery; many products require special storage conditions for which we are not responsible once they arrive to the client's facility. Please review the product's SDS for proper storage and handling.
• For products with 3 to 6 months of remaining shelf life, claims must be made within the next 2 business days after receipt.
• Returns are not accepted for products with less than 3 months of remaining shelf life.
• Returns are not accepted for products purchased during a low Shelf Life promotion, items sold with discounts, or special orders that must be placed directly with the factory.
• The customer is responsible for the return shipping cost, except in cases where the return is due to an error on the part of Aircraft Shop Supply.
• Refunds will only be issued after the product has been inspected and no damage is found.
• A 25% Restocking Fee will be charged for returns of products in good condition that are either no longer needed or were ordered incorrectly.
• A 35% Restocking Fee will be charged for returns of products with one year or less of remaining shelf life.
• No Restocking Fee will be charged if Aircraft Shop Supply is responsible for incorrectly shipping a product, or if the order is damaged upon leaving the warehouse.
• Hazardous Materials & Dangerous Goods: These items are sold as final and are not eligible for return approval.

At Aircraft Shop Supply, we are committed to shipping the highest quality and freshest product possible. To ensure efficient stock rotation and meet aviation industry standards, our inventory management is governed by the following policy:

1. Scope of Application
All Sales Channels: This policy applies to all orders processed by Aircraft Shop Supply, including but not limited to: website purchases, direct email orders, formal Purchase Orders (POs), phone orders, and contract agreements.

2. Inventory Management (FIFO)
All products with an expiration date are managed and shipped on a strict "First In – First Out" (FIFO) basis.

3. Minimum Shipping Margin
Standard Guarantee: We will not ship any products with fewer than 30 days of use remaining (days before expiration), unless previously coordinated and agreed upon with the customer.

No Automatic Guarantees: Outside of this 30-day minimum margin, Aircraft Shop Supply does not make any automatic guarantee as to the specific length of time remaining on any shelf-life item for standard orders.

4. Special Customer Requirements
We understand that certain projects, maintenance schedules, or regulatory standards require strict specifications. If your order has specific shelf-life requirements, please proceed as follows:

How to Request: If you require a specific Date of Manufacture (DOM), Date of Expiration (DOE), or a specific minimum shelf-life percentage (%), you must clearly state this requirement:

In the Comments/Notes section when placing an online order.

Explicitly written on your Purchase Order (PO) or quote request email for offline orders.

Validation Process: Once your requirement is received:

We will ship your order if the available stock matches your specifications.

If we do not have the exact batch, we will contact you prior to shipping with the shelf-life percentage (%) or dates we have available for your acceptance.

5. Limitation of Liability and Validity of Information
To ensure transparency and manage expectations, the following terms and conditions apply:

Time-Limited Validity: Any information provided by our team regarding the remaining shelf-life percentage (%) is valid only at the exact time the inquiry is made. Due to high inventory turnover, availability is subject to change without prior notice.

Informational Purposes Only: Shelf-life data provided by Aircraft Shop Supply is strictly for informational purposes and reflects the availability at the moment of inquiry. It does not constitute a batch reservation or a product warranty.

Supply Chain Liability Exclusion: Aircraft Shop Supply is not responsible for the time elapsed or any product expiration that occurs after the order has been prepared and packed. This includes, but is not limited to: the time between order placement, carrier transit times, intermediary storage, customs delays, and final delivery to the end user. It is the customer's responsibility to account for these logistical lead times within their planning.